Installation and Maintenance Instructions
according to Regulation DIN 82079
Information about the Manufacturer
Giebel FilTec GmbH
Stainless steel, FKM
No ingredients that must be named according to Regulation (EC) No. 1907/2006.
Structure and Materials
|Adsorber connection||BSP G 1/2“ female||BSP G 1“ female|
|Connection system||BSP G 1/2“ male||BSP G 1“ male|
Installation and Commissioning
Assembly of Protection Hood
1. Screw the protection hood on the machine. Caution: Installation only with the groove marking downwards. Lightly oil the thread first.
2. Screw the adsorber in the protection hood.
1. Screw the adsorber off.
2. Screw the protection hood off.
3. Check connections, seals and housing for damage.
4. Reassemble everything.
Risk and Hazard Analysis
1. Humid Air flows into the System
Housing is damaged
If the housing is too badly damaged, the adsorber may no longer be adequately protected. The protective hood should be replaced with a new one.
2. Protective hood is damaged
Before using the protective hood, the ambient and operating conditions should be observed. An aggressive environment or liquid in the container can damage the assembly.
Incorrect or improper handling can damage the connections and the housing. The recommended installation must be observed.
3. Thread of the Adsorber and Accessories is damaged
When mounting the adsorber as well as the valve part on the system, the threads must be slightly wetted with oil. Failure to lubricate the threads can lead to rubbing of the individual threads and is no reason for complaint.
1. Check O-ring for wear
|Check||The O-ring installed on the valve adapter must be checked for perfect condition. For this purpose the O-ring should be checked for brittleness.|
|Measures||If damage is present, the O-ring should be replaced.|
2. Optical control of the Valve Adapter
|Check||The valve adapter must be visually checked for damage. Damage can occur due to various environmental or operating conditions or improper handling.|
|Measures||If the valve adapter is damaged, it should be replaced to ensure full functionality.|
3. Replacement of Wearing Parts
|Check||The wear parts of the valve adapter are to be checked with respect to their condition.|
|Measures||Regardless of the result of the test, it is recommended to replace the wearing parts to ensure smooth operation.|
Contact and sales partner