GIEBEL Adsorber®

Adsorber VV-D

Many-sided in use.
Easy to maintain.
Cost-effective in price.

APPLICATIONS

HYDRAULIC UNITS

GEARS

BARRELS & IBC

Food compliant

Corrosivity C4-high

IP Protection 33

GIEBEL Adsorber®

...setting standards in
aeration drying!

Worldwide.

Print Friendly, PDF & Email

ADSORBER VV-D

VV D

AdsorberVV D k

The GIEBEL Adsorbers of the Adsorber VV-D series are cost-effective solutions which are equipped without valves. The adsorbers of this series are filled with 0.1 to 4.6 kg of the desiccant silica gel and therefore have a water absorption capacity of up to 1.84 l. With a 3μm filter the sucked in air is additionally completely cleaned. An activated carbon layer adsorbs oil mist and protects the desiccant and the environment from contamination.

In the VV-D series, the entire adsorber is replaced after saturation, which minimizes maintenance requirements. Especially for plants with a permanent air exchange and only short maintenance periods, the use of a disposable version is recommended. When using an adsorber without valves, the pressure build-up is minimal and recommended for use on IBCs.

 

 

 


 

Downloads

Symbol Flyer
Symbol Anleitungen
Symbol Zollangaben
REACH
RoHS
Fact Sheet     Manual     Customs Information     REACH     RoHS
  Compliant Compliant
                         
CE Konformität
 
IP Schutzart
 
Korrosivitaet
Symbol Technisches Datenblatt
CAD Dateien
EC-Conformity     IP Protection Class Corosivity Class Data Sheets CAD-Data
      IP63     C5     Webshop     Contact

 

Videos

 


 

Applications

Hydraulic Power Packs     Gears     Barrels & IBC


 

Build up and added value


 

METHOD OF OPERATION

 


 

Technical Data

 

Fliessbild ADSORBER VV-D ENThe sucked-in air flows into the adsorber almost without pressure. After flowing into the adsorber, the air is distributed evenly over the cross-section. The pre-filter disc removes coarse dirt particles from the air already at this stage.
When the desiccant silica gel flows through, the water molecules are reliably removed from the air. The gap volume of the granulate is optimally selected with 2 to 5mm grains. This guarantees a minimum pressure build-up and at the same time very good drying efficiency. Thus, at the beginning of the drying process a residual air humidity of max. 2 % rH and a dew point of -40 °C is achieved. Due to the water absorption, the silica gel in the standard version turns from orange to green, indicating the end of the product life cycle. At the end a 3 µm filter ensures that all dirt particles are separated from the ambient air and the silica gel and that the connected system is not contaminated.

With the outflowing air the GIEBEL specific two-stage spill protection prevents larger oil droplets from penetrating into the desiccant. This is supplemented by the activated carbon, which adsorbs the finest oil particles and thus enables the adsorber to regenerate itself.

These adsorbers consist of polycarbonate, polyamide, silica gel orange, FKM and can be used for the aeration of all common hydraulic and gear oils and lubricants, fuels, isocyanates. The GIEBEL team is at your disposal for the clarification of resistances.

Pressure difference

Adsorber VV-D Druckdifferenz Grafiken Adsorber VV-D Druckdifferenz Grafiken

Adsorber VV-D Druckdifferenz Grafiken Adsorber VV-D Druckdifferenz Grafiken


 

EXECUTIONS - Adsorber VV-D

 

vv d 1m vv d 1l vv d 2m vv d 2l vv d 3m vv d 3l vv d 5m vv d 5l vv d 5xl

Adsorber

VV-D 1M

VV-D 1L

VV-D 2M

VV-D 2L

VV-D 3M

VV-D 3L

VV-D 5M

VV-D 5L

VV-D 5XL

Total weight [kg]

0,2

0,3

0,7

1,0

1,4

2,1

3,1

4,5

6,0

Adsorbens [kg]

0,1

0,2

0,3

0,5

0,8

1,4

2,2

3,1

4,6

Max. Water absorption [ml]

40

80

120

200

320

560

880

1320

1840

Height [mm]

97

141

152

210

226

326

264

364

464

Diameter [mm]

60/63

60/63

90/94

90/94

110/114

110/114

150/154

150/154

150/154

Connection

BSP, NPT, Metric

BSP, NPT, Metric, Slipfit

Valves [IN - OUT]

0 - 0

0 – 0

0 – 0

0 – 0

0 – 0

0 – 0

0 – 0

0 – 0

0 - 0

WE'RE HERE FOR YOU

You will receive an offer on the same day
We are happy to advise you on short notice via video or
realize a personal appointment within one week.
You will receive a standard GIEBEL Adsorber within a week.

GIEBEL FilTec GmbH
Carl-Zeiss-Str. 5 | 74626 Bretzfeld | Germany
Phone: +49 79 46 94 44 01-0  
E-Mail: info@giebel-adsorber.de