GIEBEL Adsorber®

Adsorber ME-RV

Reliable application consistency.
Low maintenance costs.
Long change intervals.

APPLICATIONS

HYDRAULICS

GEARS

STORAGE TANKS

Food-compliant stainless steel housing

Corrosivity class C4-high

IP Protection class

Suitable according to ATEX 2014
& Offshore

GIEBEL Adsorber®

...setting standards in

aeration drying!

Worldwide.

Print Friendly, PDF & Email

Adsorber ME-RV

DV510 ME Logo

Produktbild Adsorber ME-RV Solo 3

The excellent adsorber ME-RV is made entirely of A4 stainless steel. With a separate valve section, the maintenance interval is considerably extended. With up to 5.2 kg desiccant, even large hydraulic tanks in offshore applications, as well as gear boxes in the chemical industry and storage tanks can be efficiently ventilated.

The use according to ATEX product directive 2014/34/EU in zone II 2 G / D IIC T4 is possible as well as according to the corrosiveness category C5-M. On gearboxes or hydraulic tanks on ship decks, the valves protect the desiccant and, in the event of swell, the oils and lubricants from contamination and damage by water.

Due to the optimized design, these adsorbers can be maintained very quickly and cost-effectively. The wear parts or the pure desiccant are quickly inserted and the protection of the system to be ventilated is restored.

 

 

 


 

Downloads

Symbol Flyer
Symbol Anleitungen
Symbol Zollangaben
REACH
RoHS
Product Flyer     Manual     Customs Information     REACH     RoHS
                  Compliant     Compliant
                         
CE Konformität
 
IP Schutzart
 
Korrosivitaet
Symbol Technisches Datenblatt
CAD Dateien
EC-Conformity     IP Protection Class     Corosivity Class     Data Sheets     CAD-Data
      IP66     C5     Webshop     Contact
                         
CE Konformität                        
ATEX Declaration                        

 

Videos

 


 

Applications

Hydraulic Power Packs     Gears     Storage tanks


 

Build up and added value

ME RV Slider Schnittb EN 06 2020


 

METHOD OF OPERATION


 

Technical Data

Fliessbild Adsorber ME-RV ENThe sucked in air opens the valves in the lower part of the adsorber already at approx. 5 mbar. After flowing into the adsorber, the air is distributed evenly over the cross-section. The pre-filter disc removes coarse dirt particles from the air already at this point.

When the desiccant silica gel flows through, the water molecules are reliably removed from the air. The gap volume of the granulate is optimally selected with 2 to 5mm grains. This guarantees a minimum pressure build-up and at the same time very good drying efficiency. Thus, at the beginning of the drying process, a residual air humidity of max. 2 % rH and a dew point of -40 °C is achieved. Due to the water absorption, the silica gel in the standard version turns from orange to green, indicating the end of the product life cycle. At the end a 3 µm filter ensures that all dirt particles are separated from the ambient air and the silica gel and that the connected system is not contaminated.

With the outflowing air the GIEBEL specific two-stage spill protection prevents larger oil droplets from penetrating into the desiccant. This is supplemented by the activated carbon, which adsorbs the finest oil particles and thus enables the adsorber to regenerate itself.

These adsorbers are made of A4 stainless steel, Silicagel Orange, FKM or EPDM and can be used for the aeration of all common hydraulic and gear oils and lubricants, fuels, isocyanates. In addition, this series can be used to ventilate e.g. SKYDROL, brake fluids and solvents. The GIEBEL team is gladly at your disposal for clarification of resistances.

PRESSURE DIFFERENCE

Adsorber ME-RV Druckdifferenz Grafiken Adsorber ME-RV Druckdifferenz Grafiken

Adsorber ME-RV Druckdifferenz Grafiken

 

EXECUTIONS - Adsorber ME-RV

 

ma r 1l ma r 1l ma r 1l ma r 1l ma r 1l ma r 1l

Adsorber

ME-RV 2L

ME-RV 3M

ME-RV 3L

ME-RV 5M

ME-RV 5L

ME-RV 5XL

Total weight [kg]

3,5

4,8

6,1

8,7

10,8 13,2

Adsorbens [kg]

0,5

0,9

1,4

2,5

3,8 5,2

Max. Water absorption [ml]

200

360

560

1000

1520 2080

Height [mm]

210

290

390

320

420 520

Diameter [mm]

90/120

110/140

110/140

150/180

150/180 150/180

Connection

BSP, NPT, Metric, Slipfit

Valves [IN - OUT]

1 - 1

1 - 1

1 - 1

2 - 2

2 - 2 2 - 2

WE'RE HERE FOR YOU

You will receive an offer on the same day
We are happy to advise you on short notice via video or
realize a personal appointment within one week.
You will receive a standard GIEBEL Adsorber within a week.

GIEBEL FilTec GmbH
Carl-Zeiss-Str. 5 | 74626 Bretzfeld | Germany
Phone: +49 79 46 94 44 01-0  
E-Mail: info@giebel-adsorber.de